The Samyang 14mm T3.1 VDSLR ED AS IF UMC II (Sony E) is a lens for the Sony E mount. It fits 49 cameras natively in our database, and 15 Nikon Z cameras can use it via adapter (manual focus only).
| Mount | Sony E |
|---|---|
| Flange Back | 18.0 mm |
| Mount Diameter | 46.1 mm |
| Sensor | Full Frame |
| Lens Type | Prime |
| Electronic Contacts | No |
| Manufacturer | Samyang |
| Release Year |
Schematic only: it shows the sensor format this lens is designed for, drawn at typical format sizes — not a measured image circle of this lens.
Samyang 14mm T3.1 VDSLR ED AS IF UMC II is a manual-focus cine lens from Samyang for full-frame Sony E-mount cameras. Its maximum aperture is T3.1 (a T-stop, which measures the light that actually passes through the lens). It has 14 elements in 10 groups, focuses down to 0.28 m and weighs about 640 g in the Sony E-mount version. Versions for other mounts are also listed in our database. Values are from Samyang’s official product page.
Affiliate links — we may earn a commission. Disclosure
Compatible Cameras
Native Mount — Sony E Cameras (49)
- QX1 (Manual focus only)
- Alpha 3500 (Manual focus only)
- Alpha 3000 (Manual focus only)
- Alpha 6100 (Manual focus only)
- Alpha 7R VI (Manual focus only)
- ZV-E10 II (Manual focus only)
- ZV-E10 (Manual focus only)
- NEX-3 (Manual focus only)
- NEX-5 (Manual focus only)
- NEX-C3 (Manual focus only)
- NEX-5N (Manual focus only)
- NEX-7 (Manual focus only)
- NEX-F3 (Manual focus only)
- NEX-6 (Manual focus only)
- NEX-5R (Manual focus only)
- NEX-3N (Manual focus only)
- NEX-5T (Manual focus only)
- Alpha 5000 (Manual focus only)
- Alpha 5100 (Manual focus only)
- Alpha 6000 (Manual focus only)
- Alpha 7 IV (Manual focus only)
- Alpha 7 III (Manual focus only)
- Alpha 7 II (Manual focus only)
- Alpha 7 (Manual focus only)
- Alpha 7S III (Manual focus only)
- Alpha 7S II (Manual focus only)
- Alpha 7S (Manual focus only)
- Alpha 7C II (Manual focus only)
- Alpha 7CR (Manual focus only)
- Alpha 7C (Manual focus only)
- ZV-E1 (Manual focus only)
- Alpha 6700 (Manual focus only)
- Alpha 6600 (Manual focus only)
- Alpha 6500 (Manual focus only)
- Alpha 6400 (Manual focus only)
- Alpha 6300 (Manual focus only)
- Alpha 1 II (Manual focus only)
- Alpha 1 (Manual focus only)
- Alpha 9 III (Manual focus only)
- Alpha 9 II (Manual focus only)
- Alpha 9 (Manual focus only)
- Alpha 7R V (Manual focus only)
- Alpha 7R IV (Manual focus only)
- Alpha 7R IV A (Manual focus only)
- Alpha 7R III (Manual focus only)
- Alpha 7R III A (Manual focus only)
- Alpha 7R II (Manual focus only)
- Alpha 7R (Manual focus only)
- Alpha 7 V (Manual focus only)
Via Adapter — Nikon Z Cameras (15) · 9 third-party adapters
- TZE-01 Third-partyAF: Selected cameras only — Techart names only the Z6 and Z7 for AF-S, AF-C and MF, and says the TZE-01 does not work with the Z50. Samyang/Rokinon lenses and manual focus lenses are currently not supported.
- TZE-02 Third-partyAF: Selected cameras only — Techart names only the Z6 and Z7 for AF-S, AF-C and MF, and says the TZE-01 does not work with the Z50. Samyang/Rokinon lenses and manual focus lenses are currently not supported.
- E-Z Third-partyAF: Supported with limitations — Viltrox supports AF-S, AF-C, AF-A, AF-F and MF and publishes a lens compatibility list. With pinpoint AF on Nikon cameras, Viltrox recommends switching to a different focus area. Its compatibility list (adapter firmware V4.40) names the lenses Viltrox tested on the Z5, Z6, Z6 II, Z7, Z7 II, Z8, Z9, Z30, Z50 and Z fc; results with other lenses or cameras are not covered by the list.
- ETZ21 Third-partyAF: Supported with limitations — Megadap's manual says AF-S, AF-C, AF-A and MF work, but AF-S focus efficiency drops slightly because pinpoint focusing uses contrast detection AF, and results vary by lens brand and generation.
- ETZ21 Pro+ Third-partyAF: Supported with limitations — Megadap's firmware notes list ongoing compatibility fixes for some Sony and third-party lenses, and Megadap does not recommend lenses heavier than 1.5 kg.
- Fusion Smart AF Adapter (SNE-NKZ-FSN) Third-partyAF: Supported with limitations — Fotodiox says AF results vary by lens age and type, and AF may be slow or not work with some lenses, especially older and third-party lenses. It fits full-frame Nikon Z cameras only, not the Z 30, Z 50 or Z fc.
- MK-ETZ Third-partyAF: Supported with limitations — Meike says the adapter works with most automatic E-mount lenses and publishes a list of compatible lenses; AF-S, AF-C and AF-F are available.
- NW-ETZ Third-partyAF: Supported with limitations — NEEWER says it is compatible with Sony, Tamron and Sigma E and FE lenses but not with Zeiss Batis lenses.
- NW-ETZ PRO Third-partyAF: Supported with limitations — NEEWER says it is compatible with Sony, Tamron and Sigma E and FE lenses but not with Zeiss Batis lenses.
- Z6II (Manual focus only)
- Z7II (Manual focus only)
- Z5 (Manual focus only)
- Z9 (Manual focus only)
- Z8 (Manual focus only)
- Zf (Manual focus only)
- Z6III (Manual focus only)
- Z5II (Manual focus only)
- ZR (Manual focus only)
- Z50 (Manual focus only)
- Zfc (Manual focus only)
- Z30 (Manual focus only)
- Z50II (Manual focus only)
- Z6 (Manual focus only)
- Z7 (Manual focus only)
Spotted an error or something missing on this page? Let us know — we check every report against official sources.