Sony E to Nikon Z

Sony E lenses can be used on Nikon Z cameras with 9 third-party adapters. Our database lists 317 Sony E lenses and 15 Nikon Z cameras for this combination. Autofocus depends on the adapter (see the table below).

Links on this page, including the “on eBay” buttons, may be affiliate links. If you buy through them, we may earn a commission at no extra cost to you. See our Affiliate Disclosure.

Nikon Z cameras cannot mount Sony E lenses directly, and every adapter for this combination in our database comes from a third-party maker: Megadap, Techart, Viltrox, Fotodiox, Meike and NEEWER. Techart explains that its adapter uses the 2 mm difference in flange distance between the two mounts. Camera support differs between models. Techart names the Z6 and Z7 for autofocus with its TZE-01 and TZE-02 and says the TZE-01 does not work with the Z50, while Fotodiox says its adapter will not fit APS-C Nikon Z cameras such as the Z 30, Z 50 or Z fc. NEEWER says its adapters are not compatible with Zeiss Batis lenses. Check the maker’s lens compatibility list before buying.

Adapters for Sony E lenses on Nikon Z cameras

  • Viltrox E-Z Third-party
    AF: Supported with limitations — Viltrox supports AF-S, AF-C, AF-A, AF-F and MF and publishes a lens compatibility list. With pinpoint AF on Nikon cameras, Viltrox recommends switching to a different focus area. Its compatibility list (adapter firmware V4.40) names the lenses Viltrox tested on the Z5, Z6, Z6 II, Z7, Z7 II, Z8, Z9, Z30, Z50 and Z fc; results with other lenses or cameras are not covered by the list.
  • Megadap ETZ21 Third-party
    AF: Supported with limitations — Megadap's manual says AF-S, AF-C, AF-A and MF work, but AF-S focus efficiency drops slightly because pinpoint focusing uses contrast detection AF, and results vary by lens brand and generation.
  • Megadap ETZ21 Pro+ Third-party
    AF: Supported with limitations — Megadap's firmware notes list ongoing compatibility fixes for some Sony and third-party lenses, and Megadap does not recommend lenses heavier than 1.5 kg.
  • Fotodiox Fusion Smart AF Adapter (SNE-NKZ-FSN) Third-party
    AF: Supported with limitations — Fotodiox says AF results vary by lens age and type, and AF may be slow or not work with some lenses, especially older and third-party lenses. It fits full-frame Nikon Z cameras only, not the Z 30, Z 50 or Z fc.
  • Meike MK-ETZ Third-party
    AF: Supported with limitations — Meike says the adapter works with most automatic E-mount lenses and publishes a list of compatible lenses; AF-S, AF-C and AF-F are available.
  • NEEWER NW-ETZ Third-party
    AF: Supported with limitations — NEEWER says it is compatible with Sony, Tamron and Sigma E and FE lenses but not with Zeiss Batis lenses.
  • NEEWER NW-ETZ PRO Third-party
    AF: Supported with limitations — NEEWER says it is compatible with Sony, Tamron and Sigma E and FE lenses but not with Zeiss Batis lenses.
  • Techart TZE-01 Third-party
    AF: Selected cameras only — Techart names only the Z6 and Z7 for AF-S, AF-C and MF, and says the TZE-01 does not work with the Z50. Samyang/Rokinon lenses and manual focus lenses are currently not supported.
  • Techart TZE-02 Third-party
    AF: Selected cameras only — Techart names only the Z6 and Z7 for AF-S, AF-C and MF, and says the TZE-01 does not work with the Z50. Samyang/Rokinon lenses and manual focus lenses are currently not supported.
K&F Concept adapters for Nikon Z cameras
K&F Concept sells third-party lens adapters for Nikon Z cameras. Make sure the adapter is for your lens mount. Autofocus and electronic aperture support vary, so check compatibility before buying.

Autofocus by lens type

Lens typeE-ZETZ21ETZ21 Pro+Fusion Smart AF Adapter (SNE-NKZ-FSN)MK-ETZNW-ETZNW-ETZ PROTZE-01TZE-02
Lenses with a built-in focus motor (248)AF with limitationsAF with limitationsAF with limitationsAF with limitationsAF with limitationsAF with limitationsAF with limitationsAF on selected cameras onlyAF on selected cameras only
Manual-focus lenses (69)Manual focusManual focusManual focusManual focusManual focusManual focusManual focusManual focusManual focus

“On selected cameras only” means the manufacturer lists the cameras that support it. See the adapter page for the list.

Things to check before you buy

  • Flange distance: Sony E 18 mm, Nikon Z 16 mm. The adapter bridges the 2 mm difference.
  • 935 of 4,755 lens–camera pairs in this combination carry a possible-vignetting warning because the lens is designed for a smaller sensor (APS-C lenses on Full Frame cameras: 935 pairs).
Sony E lenses sit 18 mm from the sensor. On Nikon Z cameras the mount is 16 mm from the sensor, so the adapter adds the remaining 2 mm.

An adapter can only add distance, so a lens mount with a shorter flange distance than the camera’s cannot be adapted this way.

Nikon Z cameras

See all 15 Nikon Z cameras (newest first above).

Sony E lenses

See all 317 Sony E lenses

Related combinations

All mount combinations

Spotted an error or something missing on this page? Let us know — we check every report against official sources.

Scroll to Top