M42 to Canon RF

M42 lenses can be used on Canon RF cameras with the Urth Lens Mount Adapter (M42 to Canon RF), a third-party adapter. Our database lists 147 M42 lenses and 17 Canon RF cameras for this combination.

Links on this page, including the “on eBay” buttons, may be affiliate links. If you buy through them, we may earn a commission at no extra cost to you. See our Affiliate Disclosure.

Urth makes a manual adapter for M42 mount lenses on Canon RF mount cameras and lists infinity focus as supported. Its setup guide says to enable Release Shutter Without Lens and to choose Manual or Aperture Priority (AV) mode. The camera and lens lists that follow are taken from our own database.

Think about the body you will use

Canon RF is represented by two sensor formats in the database: 12 of its 17 cameras are full-frame and 5 are APS-C. If you intend to move one M42 lens between RF bodies, do not expect identical framing. Full-frame records a wider portion of the projected image, while APS-C uses a narrower central portion. The adapter does not change that difference; it provides the mechanical connection between the lens and camera. For a lens you plan to share across both formats, compare the composition and the visible edges on the body you will actually use. A result seen on an APS-C sensor may not reveal how the lens performs farther out toward the edge of a full-frame image.

For what the M42 mount is, and for M42 aperture switches and pins, see M42 to Sony E.

Adapters for M42 lenses on Canon RF cameras

K&F Concept adapters for Canon RF cameras
K&F Concept sells third-party lens adapters for Canon RF cameras. Make sure the adapter is for your lens mount. Autofocus and electronic aperture support vary, so check compatibility before buying.

Autofocus by lens type

Lens typeLens Mount Adapter (M42 to Canon RF)
Manual-focus lenses (147)Manual focus

Things to check before you buy

  • Flange distance: M42 45.46 mm†, Canon RF 20 mm. The adapter bridges the 25.46 mm difference.
  • None of the 2,499 lens–camera pairs in this combination carries a possible-vignetting warning.
M42 lenses sit 45.46 mm† from the sensor. On Canon RF cameras the mount is 20 mm from the sensor, so the adapter adds the remaining 25.46 mm.

An adapter can only add distance, so a lens mount with a shorter flange distance than the camera’s cannot be adapted this way.

† Not confirmed from an official source. The value shown is the one most consistently given by technical references.

Canon RF cameras

See all 17 Canon RF cameras (newest first above).

M42 lenses

See all 147 M42 lenses

Related combinations

All mount combinations

Spotted an error or something missing on this page? Let us know — we check every report against official sources.

Scroll to Top