M42 to Sony E

M42 lenses can be used on Sony E cameras with the Urth Lens Mount Adapter (M42 to Sony E), a third-party adapter. Our database lists 147 M42 lenses and 49 Sony E cameras for this combination.

Links on this page, including the “on eBay” buttons, may be affiliate links. If you buy through them, we may earn a commission at no extra cost to you. See our Affiliate Disclosure.

M42 is a 42 mm screw mount found on many film-era SLR lenses, including Asahi Optical’s Takumar lenses and lenses from East German and Soviet makers. The M42 lenses in our database have no electronic contacts, so on Sony E-mount cameras they are focused by hand. Urth makes an adapter for this combination: it describes it as a manual adapter for M42 mount lenses on Sony E mount cameras and lists infinity focus as supported. Urth’s setup guide suggests turning on manual focus assist and using the camera’s Manual or Aperture Priority mode. The camera and lens lists below come from our own database.

How sensor format changes the view

Sensor format is the main difference to keep in mind when moving an M42 lens between Sony E bodies. The database includes 49 Sony E cameras, with 25 full-frame and 24 APS-C models. A full-frame sensor records a wider portion of the image projected by the lens; an APS-C sensor records a narrower central area. The lens’s marked focal length does not change, but the recorded angle of view does. That matters if you compare sample images or plan to use the same lens on more than one Sony E body. Check the sensor format of the particular camera before judging whether a lens’s framing, background coverage, or edge appearance will suit your intended use.

M42 aperture switches and stop-down pins

Many M42 lenses use an automatic diaphragm mechanism. A pin at the rear of the lens lets an original M42 SLR keep the diaphragm open while composing, then stop it down for exposure. Some lenses also have an Auto/Manual switch. A simple adapter generally does not reproduce the camera body’s pin-pressing mechanism. As a result, a lens left in Auto may remain wide open even when you turn the aperture ring. If a switch is present, check whether selecting Manual stops the diaphragm down. Also inspect whether the rear pin moves freely and whether the lens can be stopped down without the original camera body. Do not assume the adapter operates this mechanism.

Adapters for M42 lenses on Sony E cameras

K&F Concept adapters for Sony E cameras
K&F Concept sells third-party lens adapters for Sony E cameras. Make sure the adapter is for your lens mount. Autofocus and electronic aperture support vary, so check compatibility before buying.

Autofocus by lens type

Lens typeLens Mount Adapter (M42 to Sony E)
Manual-focus lenses (147)Manual focus

Things to check before you buy

  • Flange distance: M42 45.46 mm†, Sony E 18 mm. The adapter bridges the 27.46 mm difference.
  • None of the 7,203 lens–camera pairs in this combination carries a possible-vignetting warning.
M42 lenses sit 45.46 mm† from the sensor. On Sony E cameras the mount is 18 mm from the sensor, so the adapter adds the remaining 27.46 mm.

An adapter can only add distance, so a lens mount with a shorter flange distance than the camera’s cannot be adapted this way.

† Not confirmed from an official source. The value shown is the one most consistently given by technical references.

Sony E cameras

See all 49 Sony E cameras (newest first above).

M42 lenses

See all 147 M42 lenses

Related combinations

All mount combinations

Spotted an error or something missing on this page? Let us know — we check every report against official sources.

Scroll to Top