M42 to Micro Four Thirds

M42 lenses can be used on Micro Four Thirds cameras with the Urth Lens Mount Adapter (M42 to Micro Four Thirds), a third-party adapter. Our database lists 147 M42 lenses and 87 Micro Four Thirds cameras for this combination.

Links on this page, including the “on eBay” buttons, may be affiliate links. If you buy through them, we may earn a commission at no extra cost to you. See our Affiliate Disclosure.

Urth makes a manual adapter for M42 mount lenses on Micro Four Thirds mount cameras and lists infinity focus as supported. Its setup guide says to use Manual or Aperture Priority mode and to set the lens to manual focus if it has an AF/MF switch. Our own database supplies the camera and lens lists below.

Check the sensor entry for the individual camera

Micro Four Thirds is the largest camera group in this set: the database lists 87 cameras, but their sensor labels are not all the same. 83 are listed as Micro Four Thirds, 3 as Super 16, and 1 as Super 35. Do not infer sensor size from the mount name alone. A smaller sensor records a narrower central portion of the image circle, while a larger sensor reaches farther toward the image’s outer area. That affects framing and how much of a lens’s edge performance appears in the picture. Check the sensor entry for the specific camera rather than treating every camera under this mount as having identical coverage.

For what the M42 mount is, and for M42 aperture switches and pins, see M42 to Sony E.

Adapters for M42 lenses on Micro Four Thirds cameras

K&F Concept adapters for Micro Four Thirds cameras
K&F Concept sells third-party lens adapters for Micro Four Thirds cameras. Make sure the adapter is for your lens mount. Autofocus and electronic aperture support vary, so check compatibility before buying.

Autofocus by lens type

Lens typeLens Mount Adapter (M42 to Micro Four Thirds)
Manual-focus lenses (147)Manual focus

Things to check before you buy

  • Flange distance: M42 45.46 mm†, Micro Four Thirds 19.25 mm†. The adapter bridges the 26.21 mm difference.
  • None of the 12,789 lens–camera pairs in this combination carries a possible-vignetting warning.
M42 lenses sit 45.46 mm† from the sensor. On Micro Four Thirds cameras the mount is 19.25 mm† from the sensor, so the adapter adds the remaining 26.21 mm.

An adapter can only add distance, so a lens mount with a shorter flange distance than the camera’s cannot be adapted this way.

† Not confirmed from an official source. The value shown is the one most consistently given by technical references.

Micro Four Thirds cameras

See all 87 Micro Four Thirds cameras (newest first above).

M42 lenses

See all 147 M42 lenses

Related combinations

All mount combinations

Spotted an error or something missing on this page? Let us know — we check every report against official sources.

Scroll to Top